A swamp cooler, which is also called evaporative cooler, is a chiller that works by using the heat exchange principles. It can be utilized during the summer months when the temperature is higher and there is a need to cool down the interior of your house or car. In general, this type of cooler is also a closed system much like air conditioners which works by cycling cold water through pipes that are connected to a ventilation system which would be a fan. The fan channels air over the series of pipes that are cooled by the cold water. This results to a cooling effect, which can be used in almost any interior. There are several types of evaporative coolers in the market but no matter what kind you buy, you will eventually have to replace essential swamp cooler parts that make the system work.
Most swamp cooler machines in the market are of high quality but it does not mean that they will not need swamp cooler replacement parts. The outlet where you bought your evaporative cooler is the ideal place to look for swamp cooler parts, as it will allow you to get the exact components that you need. This is important since most brands will need specific parts to work efficiently. Thus, if you have a Champion evaporative cooler, you should look for Champion swamp cooler parts. If you have a Mastercool, limit your search to Mastercool swamp cooler parts only.
If a particular part is not available, you can turn to online retailers that could be selling the product you are looking for.
The Typical Swamp Cooler Parts That Needs Replacement
The main swamp cooler parts are the cooling pad, pump and fan.
The Cooling Pad
The difference between the temperature of the air before it goes into the cooler and after it exits it measures the efficiency of the swamp cooler, and the swamp cooler part that has the biggest influence on this factor is the cooling pad. Cooling pads are usually made of cellulose or cedar shavings.
The Circulating Pump
One of the most vital swamp cooler parts, the pump circulates water inside the evaporative cooler, driving it through pad to be cooled down. For the water to remain cool the pump has to circulate it continuously much like in a car radiator.
The Fan
A swamp air cooler is basically a big fan walled in by cooling pads inside a large frame similar to a box. The fan drives hot air outside into the pads, allowing it to cool down by as much as 30 degrees, as it evaporates molecules of water from the pads, which are continuously wetted down by the pump. The fan then drives cooled air through the room and out a vent.